BQNYL - INTERLUX 404 WHITE EPOXY BARRIER KOTE BASE

  • MSDS: BQNYL
  • Manufacturer: INTERNATIONAL PAINT (USA) INC
  • Product Name: INTERLUX 404 WHITE EPOXY BARRIER KOTE BASE
  • National Stock Number: 8010-00N011995
Product Identification

Product ID:INTERLUX 404 WHITE EPOXY BARRIER KOTE BASE
MSDS Date:02/28/1990
FSC:8010
NIIN:00N011995
MSDS Number: BQNYL

Responsible Party
INTERNATIONAL PAINT (USA) INC
2270 MORRIS AVE
UNION, NJ 07083
US

Emergency Phone: 201-686-1300

Info Phone: 201-686-1300

Cage: 26351

Contractor
INTERNATIONAL PAINT INC
HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

Ingredients

PYROGENIC SILICA.ACGIH TLV & OSHA PEL FOR

CAS: 7631-86-9

Fraction By Weight: 1-5%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3 TOTAL DUST


4.0 MMHG.

CAS: 110-12-3

RTECS: MP3850000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293


10.0 MMHG.

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K


AROMATIC PETROLEUM SOLVENT (SOLVENT NAPHTHA,(PETROLEUM)

CAS: 64742-95-6

Fraction By Weight: 1-5%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE DERMATITIS,SENSITIZATION OR
OTHER ALLERGIC RESPONSES.CHRONIC OVEREXPOSURE TO,AND MISUSE
OF,SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:CAN CAUSE IRRITATION WITH REDNESS,
TEARING,AND BLURRED VISION.SKIN:IRRITATION.INGESTION:MAY CAUSE
GASTROINTESTINAL IRRITATION.INHALATION:IRRITATION OF RESPIRATORY
TRACT, HEADACHE,DIZZINESS,AND UN CONSCIOUSNESS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid

First Aid:EYES:FLUSH IMMEDIATELY WITH COPIOUS AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES.GET MEDICAL ATTENTION IMMEDIATELY.SKIN: REMOVE
CONTAMINATED CLOTHING,WASH SKIN WITH PLENTY OF SOAP AND WATER.
INGESTION:CAL L A PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT
TO INDUCE VOMITING.INHALATION:REMOVE TO FRESH AIR.GIVE ARTIFICIAL
RESPIRATION IF NEEDED.GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:81F,27.2C
Lower Limits:1.0% BY VOL
Upper Limits:N/K
Extinguishing Media:USE FOAM,CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.SMOTHER FLAMES W/ APPROP MEDIA.USE WATER TO COOL UNOPENED
CNTNRS,BUT MUST NOT USE AS EXTING.PVNT (SEE SUPP)
Unusual Fire/Explosion Hazard:CONTAINS FLAM SOLVS.DO NOT USE IN AREAS
WHERE SPARK/OPEN FLAME IS PRESENT.CLOSED CNTNRS MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT.HAZ DECOMP PROD:CO,CO2,(SEE SUP)

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID
INHALATION OF VAPORS.VENTILATE AREA.CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STOR OF NFPA CLASS IC LIQ.AVOID BRTHG DUST/CHIPS FROM
SANDING/BLASTING SURFS COATED W/ PROD.DO (SEE SUPP)
Other Precautions:N/K

Exposure Controls

Respiratory Protection:IN OUTDOOR/OPEN AREAS,W/ UNRESTRICTED VENT,USE A
NIOSH APPRVD FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF
OVERSPRAY DURING SPRAY APPLICATN.IN RESTRICTED AREAS,USE A NIOSH
APPRVD RESP IAW 29 CFR 1910.134 TO REMOVE PARTICULATES & VAPS.
Ventilation:VENT IN VOL & PATTERN TO KEEP TLV AND LEL OF HAZ ING <
SPECIFIED LIMITS & REMOVE DECOMP PRODS IN WELDING/FLAME (SEE SUP)
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:CHEM WORKERS GOGS.MAY ADD FULL (SEE SUP)
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH SOILED CLOTHING BEFORE REUSE.WASH HANDS
BEFORE EATING OR SMOKING.
Supplemental Safety and Health
BP:280-344F,137.78-173.33C.% VOLAT BY WT:25 (THEORETICAL).FIRE FIGHT
PROC:SPREAD OF BURNING LIQ W/ WATER.EXPLO HAZ: VARIOUS HYDROCARBON
FRAGMENTS,ALDEHYDES.ENTRY RTE:INGEST .HNDLG/STOR PREC:NOT
USE/STORE NEAR DIRECT HEAT,FLAME,/SPARK.VENT:CUTTING ON SURFS
COATED W/ PROD.EYE PROT:LENGTH FACE SHIELD TO GOGS .

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:SEE SUPP
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>1,AIR=1
Spec Gravity:1.5,WATER=1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:DIRECT HEAT,SPARK,OR FLAME.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBON FRAGMENTS, ALDEHYDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT INCINERATE UNOPENED
CONTAINERS.XYLENE: SARA TITLE III SECTION 313 LISTED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.